Roofing

Solvent free Waterproof Protective Coating suitable for a broad range of applications from roof & gutter repair to general sealing and protection of interior and exterior joints, gaps and cracks

A 400g pack of Flexitec Primer Winter Accelerator designed to be added to 5kg of Flexitec Primer. When using winter accelerators, Flexitec Primer can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add powder hardener at the appropriate rates.

A 300g pack of Flexitec Resin Winter Accelerator designed to be added to 10kg of Flexitec Resin. If accelerating 20kg of resin, two accelerator packs will be required.When using winter accelerators, Flexitec 2020 can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add powder hardener at the appropriate rates.

A universal primer for use with Flexitec 2020 over most substrates including concrete/brickwork, felt, asphalt and timber. Flexitec 2020 Primer is used for three reasons: to seal porous surfaces, to prevent bitumen bleed-through or to enable adhesion. This product requires Restec Powder Hardener.

Reinforcement for use with the first coat of the Restec Flexitec 2020 system. This pack contains ~120m2 (~27kg) of 225g/m2 CSM.

Powder hardener for use with Restec Flexitec 2020 resin, primer and balcony sealer.

A fully printed calibrated bucket for making mixes up to 10 litres. Suitable for all Restec liquid and GRP products.

A handy non-contact thermometer ideal for accurately measuring resin and deck temperature to assist with catalysing.

Installed at external corners of the roof in the junction between an upstand fascia and drip trim. Supplied each.

A 150g pack of GRP Roof 1010 Top Coat Winter Accelerator designed to be added to 10kg of GRP Roof 1010 Top Coat. If accelerating 20kg of top coat, two accelerator packs will be required. When using winter accelerators, GRP Roof 1010 Top Coat can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add liquid catalyst at the appropriate rates.

A 300g pack of GRP Roof 1010 Base Resin Winter Accelerator designed to be added to 10kg of GRP Roof 1010 Base Resin. If accelerating 20kg of resin, two accelerator packs will be required. When using winter accelerators, GRP Roof 1010 Base Resin can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add liquid catalyst at the appropriate rates.

A catalyst dispenser with an 80ml calibrated capacity is used to safely handle liquid catalyst and measure the volume of catalyst. Liquid catalyst is used with the Restec range of GRP systems (note - not Flexitec 2020, which used a powder hardener)

Bandage tape for joints and detailing work. This pack contains 6 No. 18lm long and 75mm wide 450g/m2 CSM for use with Restec's range of liquid and GRP roofing systems.

Reinforcement for use with the base laminate of Restec's range of GRP systems. This pack contains 15m2 of 450g/m2 CSM

A 20kg (net weight) tin of GRP Roof 1010 Top Coat. This forms the top coat and second layer of the GRP Roof 1010 roofing system. GRP Roof 1010 Top Coat is pigmented Dark Admiralty Grey and features enhanced weathering and durability. Note - Top Coat requires Restec Liquid Catalyst. This 20kg pack covers up to 30m2.

A 20kg (net weight) tin of GRP Roof 1010 Base Resin. This forms the base laminate and first layer of the GRP Roof 1010 roofing system. Base resin incorporates Restec 450g/m2 or 600g/m2 CSM fibreglass and requires Restec Liquid Catalyst. This 20kg pack covers up to 16m2.

Bright aluminium reflective coating suitable for application to bituminous roofing substrates.

Heavy body bituminous mastic for sealing cracks and spills in roofing substrates and gutters.

Hip Tile Clips are designed for mechanically securing small cut tiles along the hip, vulnerable to wind up lift damage and with insufficient support for adjacent tiles along the hip. The clips are supplied in long and short formats, the short clips are used in securing the cut tile at the intersection with the adjacent tile, while the long clip holds the cut tile up from the base along the hip. Hip Clip Pack contents: 20x Large Clips 20x Small Clips

Made from PVC, our Hip Trays are 1.2m in length by 250mm. Fitted above the Ridge Roll, they are designed to provide an even, level run to the hip of a roof. Can be purchased within the Hip Kit or separately.