Roofing

Solvent free Waterproof Protective Coating suitable for a broad range of applications from roof & gutter repair to general sealing and protection of interior and exterior joints, gaps and cracks

A 400g pack of Flexitec Primer Winter Accelerator designed to be added to 5kg of Flexitec Primer. When using winter accelerators, Flexitec Primer can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add powder hardener at the appropriate rates.

A 300g pack of Flexitec Resin Winter Accelerator designed to be added to 10kg of Flexitec Resin. If accelerating 20kg of resin, two accelerator packs will be required.When using winter accelerators, Flexitec 2020 can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add powder hardener at the appropriate rates.

A universal primer for use with Flexitec 2020 over most substrates including concrete/brickwork, felt, asphalt and timber. Flexitec 2020 Primer is used for three reasons: to seal porous surfaces, to prevent bitumen bleed-through or to enable adhesion. This product requires Restec Powder Hardener.

Reinforcement for use with the first coat of the Restec Flexitec 2020 system. This pack contains ~120m2 (~27kg) of 225g/m2 CSM.

Powder hardener for use with Restec Flexitec 2020 resin, primer and balcony sealer.

A fully printed calibrated bucket for making mixes up to 10 litres. Suitable for all Restec liquid and GRP products.

A handy non-contact thermometer ideal for accurately measuring resin and deck temperature to assist with catalysing.

Installed at external corners of the roof in the junction between an upstand fascia and drip trim. Supplied each.

A 150g pack of GRP Roof 1010 Top Coat Winter Accelerator designed to be added to 10kg of GRP Roof 1010 Top Coat. If accelerating 20kg of top coat, two accelerator packs will be required. When using winter accelerators, GRP Roof 1010 Top Coat can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add liquid catalyst at the appropriate rates.