Roofing

A universal primer for use with Flexitec 2020 over most substrates including concrete/brickwork, felt, asphalt and timber. Flexitec 2020 Primer is used for three reasons: to seal porous surfaces, to prevent bitumen bleed-through or to enable adhesion. This product requires Restec Powder Hardener.

Powder hardener for use with Restec Flexitec 2020 resin, primer and balcony sealer.

Reinforcement for use with the first coat of the Restec Flexitec 2020 system. This pack contains ~120m2 (~27kg) of 225g/m2 CSM.

A 20kg (net weight) tin of GRP Roof 1010 Top Coat. This forms the top coat and second layer of the GRP Roof 1010 roofing system. GRP Roof 1010 Top Coat is pigmented Dark Admiralty Grey and features enhanced weathering and durability. Note - Top Coat requires Restec Liquid Catalyst. This 20kg pack covers up to 30m2.

A 150g pack of GRP Roof 1010 Top Coat Winter Accelerator designed to be added to 10kg of GRP Roof 1010 Top Coat. If accelerating 20kg of top coat, two accelerator packs will be required. When using winter accelerators, GRP Roof 1010 Top Coat can be applied in temperatures as low as 1°C (usual 5°C limit). Note - After adding Winter Accelerator, mix thoroughly and add liquid catalyst at the appropriate rates.

Bandage tape for joints and detailing work. This pack contains 6 No. 18lm long and 75mm wide 450g/m2 CSM for use with Restec's range of liquid and GRP roofing systems.

Reinforcement for use with the base laminate of Restec's range of GRP systems. This pack contains 15m2 of 450g/m2 CSM

A catalyst dispenser with an 80ml calibrated capacity is used to safely handle liquid catalyst and measure the volume of catalyst. Liquid catalyst is used with the Restec range of GRP systems (note - not Flexitec 2020, which used a powder hardener)