Expamet 150mm x 47mm Masonry Joist Hanger

Design Features: • Single-piece, non-welded construction. • Wider masonry flange to increase loadings on masonry of compressive strength 2.8N/mm2 and greater. • Manufactured from 2mm thick pre-galvanised mild steel to BS EN 10346 : 2015, DX51D + Z600. • 75mm load bearing surfaces. • All hangers 150mm deep and over are manufactured 10mm less to allow for notching and regularisation of timber joists. • Gusset nail holes are non coaxial. • Standard available widths 38, 44, 47, 50, 63, 75, 89, 100, 125, 150mm.